Reliance Electric 50FN4031  50 HP, 460 VAC non‑regenerative DC drive
May 30, 2026

Reliance Electric 50FN4031 50 HP, 460 VAC non‑regenerative DC drive

Reliance Electric 50FN4031 is a 50 HP, 460 VAC non‑regenerative DC drive from the FlexPak 3000 series, designed for precise speed and torque control of DC motors in industrial applications.

Description

Product Introduction

Reliance Electric 50FN4031 is a 50 HP, 460 VAC non‑regenerative DC drive from the FlexPak 3000 series, designed for precise speed and torque control of DC motors in industrial applications.

Model Interpretation

  • 50 = 50 horsepower rating

  • F = FlexPak 3000 series

  • N = Non‑regenerative (no four‑quadrant operation)

  • 4031 = 460 VAC input, standard control firmware

Technical Parameters

  • Power rating: 50 HP (37 kW)

  • Input voltage: 460 VAC, 3‑phase, 50/60 Hz

  • Output: DC armature voltage 0–460 VDC

  • Full load AC line current: ~78 A

  • Full load DC armature current: ~90 A

  • Field current: Adjustable (typically 5–15 A)

  • Enclosure: Chassis‑style (open frame)

  • Control: Microprocessor‑based, speed/torque regulation

  • Communication: Optional serial/network modules

  • Operating temperature: 0 °C to +45 °C

  • Status: Discontinued; available as surplus/refurbished

Interface & Communication

  • Power terminals: 3‑phase AC input, DC armature output, DC field output

  • Control terminals: Start/stop, speed reference, fault signals

  • Front panel: Keypad and LED display for setup and monitoring

  • Optional: RS‑232/485, Profibus, or DeviceNet communication modules

Core Functions

  • Speed control: Closed‑loop regulation with tachometer or encoder feedback

  • Torque control: Adjustable current limit for constant‑torque operation

  • Overload protection: Electronic overload, short‑circuit, and ground‑fault protection

  • Field weakening: Extended speed range above base speed

  • Diagnostics: Built‑in fault logging and parameter monitoring

Application Scenarios

  • Conveyors: Mining, material handling, and assembly lines

  • Machine tools: Lathes, mills, and grinders requiring precise speed control

  • Extruders: Plastic and rubber processing machinery

  • Pumps/fans: Variable‑speed flow control in HVAC and process systems

Operation & Maintenance

  • Mount in a well‑ventilated cabinet; avoid high‑vibration areas

  • Connect 3‑phase AC power, DC armature, and field wiring per schematic

  • Set parameters via front panel or software: motor nameplate data, speed limits, current limits

  • Regularly inspect cooling fans, heat sinks, and wiring connections

  • Keep the drive clean; blow out dust periodically

  • Discontinued by Reliance Electric; use refurbished units or upgrade to modern AC drives


Get a Quote