Model Definition

DKC: ECODRIVE series servo drive controller

01.3: Hardware platform version

018: 18 A continuous rated output current

3: Low voltage class with 300 V DC nominal bus

MGP: Factory pre-installed multi-interface general purpose firmware

Technical Specifications

Electrical Parameters

Three-phase input voltage: 200–240 V AC, 50/60 Hz

Continuous output current: 18 A

Peak output current: 36 A (2× overload capacity)

Nominal DC bus voltage: 300 V DC

Control power supply: 24 V DC ±20%

Compatible motors: MKD, MKE, MSM series synchronous servo motors

Maximum output frequency: 1000 Hz

Mechanical & Environmental Parameters

Cooling mode: Internal forced air cooling

Dimensions (W×H×D): 100 mm × 350 mm × 250 mm

Weight: Approximately 5.1 kg

Operating temperature: 0 °C to +45 °C

Storage temperature: -25 °C to +85 °C

Protection class: IP20

Interface and Communication Configuration

Motor feedback: Standard incremental encoder interface, supports optional absolute encoder

Digital I/O: Integrated 24 V DC input and output for enable, limit, reference and fault signals

Control interface: Supports analog ±10 V command and pulse command

Communication: Built-in RS232/485 interface, optional PROFIBUS DP and CANopen expansion modules

Diagnostics: 7-segment digital display and LED status indicators

Core Functions

Supports torque, speed and position three control modes

Stable operation under medium load with reliable overload performance

Preloaded MGP firmware for universal positioning and synchronous motion tasks

Equipped with homing, jog and point-to-point positioning functions

Full protection against overvoltage, undervoltage, overcurrent, overtemperature and short circuit

Features regenerative power processing capability

Application Scenarios

Medium-load main and auxiliary axes of CNC machine tools

Packaging, printing and textile production machinery

Automated assembly lines and material handling equipment

General automation equipment with 200–240 V AC power supply

Replacement and renovation of old DKC01.3 series servo systems

Usage and Maintenance

Install the drive vertically and reserve sufficient space for ventilation and heat dissipation

Complete all power, motor and signal wiring before switching on power

Use shielded cables for encoder and signal lines to reduce electromagnetic interference

Clean cooling fans and dust filters every 3 to 6 months in dusty environments

Check terminal tightness and device status regularly

Complete parameter configuration and commissioning via IndraWorks software