Model Definition

• DDS3.1: Third‑generation servo drive series for DIAX03 control systems

• W: Internal cabinet convection air cooling

• 150: 150 A continuous rated current, 300 A peak current

• D: Standard digital motor feedback interface (DSF)

Technical Specifications

Electrical Parameters

• DC bus voltage: 300 V DC ±15% (supplied by TVD/TVM power units)

• Control power: 24 V DC (20–28 V DC operating range)

• Continuous output current: 150 A

• Peak output current: 300 A (short‑term)

• Current loop cycle: 62.5 μs

• Speed loop cycle: 250 μs

• Position loop cycle: 1 ms

• Power dissipation: ~820 W

• Compatible motors: MDD/MKD synchronous motors, LAR/LAF linear motors, 2AD series

Mechanical & Environmental

• Cooling: Internal cabinet convection

• Protection class: IP20 (front), IP10 (unit)

• Operating temperature: 0 °C to +45 °C (20% derating at 55 °C)

• Storage temperature: -30 °C to +85 °C

• Max altitude: 1000 m (35% derating above)

• Dimensions (W×H×D): 150 mm × 408 mm × 180 mm

• Weight: ~8.0 kg

Interface and Communication Configuration

• Motor feedback: X4 dual‑channel (digital encoder DSF)

• System bus: Shared 300 V DC bus for multi‑axis parallel operation

• Communication: U1–U5 expansion slots (SERCOS, PROFIBUS, CANopen optional)

• Digital I/O: 6 isolated inputs, 3 isolated outputs

• Service port: RS232 (IndraWorks setup/diagnostics)

Core Functions

• High‑speed three‑loop control (current/speed/position) for fast, stable heavy‑load response

• Digital feedback interface ensures precise positioning and velocity regulation

• Convection cooling fits standard cabinets without extra cooling

• Comprehensive protection: overvoltage, undervoltage, overcurrent, short circuit, overtemperature, feedback loss

• Supports torque/speed/position control modes

• Modular design simplifies maintenance and expansion

Application Scenarios

• Heavy‑load main axes and multi‑axis CNC machine tools

• Large textile, printing, and packaging machinery

• Heavy gantry systems, large conveyors, automated lines

• DIAX03 system upgrades with digital feedback

• Cabinet‑space‑constrained equipment using convection cooling

Usage and Maintenance

• Ensure unobstructed cabinet airflow for cooling

• Keep ambient temperature ≤45 °C to avoid derating

• Complete all power/feedback/bus/control wiring before power‑on

• Configure parameters and tune loops via IndraWorks

• Every 6 months: clean heat paths, check terminals