Model Definition

DDS3.1: Third-generation servo drive series designed for DIAX03 control system

W: Internal cabinet convection air cooling

030: 30 A continuous rated current, 60 A short-term peak current

Technical Specifications

Electrical Parameters

DC bus voltage: 300 V DC ±15%, supplied by TVD or TVM power units

Control power supply: 24 V DC, operating range from 20 V DC to 28 V DC

Continuous output current: 30 A

Peak output current: 60 A for short-time operation

Current loop cycle: 62.5 μs

Speed loop cycle: 250 μs

Position loop cycle: 1 ms

Power dissipation: Approximately 450 W

Compatible motors: MDD, MKD synchronous servo motors, LAR, LAF linear motors, 2AD series motors

Mechanical & Environmental Parameters

Cooling method: Internal cabinet convection air cooling

Protection class: IP20 for front panel, IP10 for the whole unit

Operating temperature: 0 °C to +45 °C, 20% performance derating at 55 °C

Storage temperature: -30 °C to +85 °C

Maximum installation altitude: 1000 m, 35% performance derating above 1000 m

Dimensions (W×H×D): 120 mm × 408 mm × 180 mm

Weight: Approximately 5.5 kg

Interface and Communication Configuration

Motor feedback: X4 dual-channel interface supporting digital encoder and resolver signals

System bus: Shared 300 V DC bus for multi-axis parallel connection

Communication: U1 to U5 expansion slots for optional SERCOS, PROFIBUS and CANopen modules

Digital I/O: 6 isolated inputs and 3 isolated outputs for basic control signals

Service port: RS232 interface for parameter setting and fault diagnosis via IndraWorks

Expansion slots: U1 to U5 reserved for additional I/O and functional modules

Core Functions

High-speed three-loop control realizes fast response and high positioning accuracy.

Dual feedback compatibility adapts to different types of servo motors and working environments.

Internal convection cooling structure fits compact cabinet layout without extra cooling devices.

Built-in comprehensive protection against overvoltage, undervoltage, overcurrent, short circuit, overheating and feedback signal loss.

Supports torque, speed and position control modes to meet diverse medium-load operation requirements.

Modular design simplifies routine maintenance and functional expansion.

Application Scenarios

Medium-load auxiliary axes and multi-axis linkage of CNC machine tools

Textile, printing and packaging machinery requiring high dynamic performance

Automated assembly lines, material handling and conveying equipment

DIAX03 system upgrade and renovation projects

Automation equipment with limited cabinet space and convection cooling design

Usage and Maintenance

Ensure unobstructed air circulation inside the cabinet for reliable heat dissipation.

Maintain ambient temperature below 45 °C to avoid performance reduction.

Complete all wiring of power, feedback, bus and control circuits before powering on.

Configure parameters and tune control loops via IndraWorks according to on-site operating conditions.

Clean heat dissipation components and air passages, and check terminal connections every six months.

Calibrate control loops and feedback signals once a year to keep long-term stable operation.