Model Definition

DDS03.2: DIAX03 system servo drive series (firmware v3.x)

W: Internal cabinet air cooling

030: 30 A continuous current, 60 A peak current

BE32: SERCOS interface (DSS02.1M) + high‑resolution position interface for sinusoidal signals (DLF01.1M)

01: Hardware revision 01

Technical Specifications

Electrical Parameters

DC bus voltage: 300 V DC ±15% (powered by TVD/TVM supplies)

Control supply: 24 V DC (20–28 V DC)

Continuous output current: 30 A

Peak output current: 60 A (short‑term)

Current loop: 125 μs

Speed loop: 500 μs

Position loop: 2 ms

Power dissipation: ~120 W (@30 A)

Compatible motors: MDD/MKD synchronous, LAR/LAF linear, 2AD series

Mechanical & Environmental

Cooling: Internal air blower + heatsink

Protection class: IP20 (front), IP10 (overall)

Operating temperature: 0 °C to +45 °C (20% derating @55 °C)

Storage temperature: -30 °C to +85 °C

Max altitude: 1000 m (35% derating above)

Dimensions (W×H×D): 60 mm × 408 mm × 180 mm

Weight: ~5.5 kg

Interface and Communication Configuration

Motor feedback: X4 interface (digital servo encoder + resolver, dual‑channel)

System bus: Shared 300 V DC bus for multi‑axis parallel connection

Communication: BE32 = SERCOS (DSS02.1M) + high‑resolution analog position (DLF01.1M)

Digital I/O: 6 isolated inputs / 3 isolated outputs

Service port: RS232 (IndraWorks setup/diagnostics)

Expansion slots: U1 (comm), U5 (firmware), U2–U4 (I/O/option)

Core Functions

Three‑loop control (current/speed/position) for high precision

BE32: Pre‑configured SERCOS + high‑resolution analog position interface

Internal cooling saves cabinet space for dense multi‑axis layouts

Comprehensive protection: over/undervoltage, overcurrent, short circuit, overheat, feedback loss

Torque/speed/position control modes

Modular design for easy maintenance/upgrades

Application Scenarios

Medium‑power CNC machine axes with high‑resolution analog position feedback

Textile/printing/packaging machinery requiring multi‑axis sync + high‑resolution positioning

Automated assembly lines & handling robots needing SERCOS + analog position control

Automation systems requiring SERCOS real‑time communication + high‑resolution analog position interface

DIAX03 system upgrades with pre‑configured communication and position interfaces

Usage and Maintenance

Ensure unobstructed cabinet airflow (maintain cooling efficiency)

Keep ambient ≤45 °C to avoid performance derating

Complete power/feedback/control wiring before power‑on

Configure via IndraWorks (match motor/load parameters)

Clean air passages/heatsinks every 6 months; inspect terminals

Calibrate control loops/feedback annually for stability