Product Introduction

Model Explanation

• 1KGT012111R40: Full order part number

• Type: Digital Output (DO) module

• Series: ABB RTU560

• Mounting: RTU560 rack slot‑mounted

Technical Parameters

• Output Channels: 8 digital outputs

• Output Type: Relay (dry contact)

• Rating: 24–250 V AC/DC, up to 5 A per channel

• Power Supply: 24 V DC (backplane)

• Operating Temp: -10°C to +55°C

• Storage Temp: -40°C to +70°C

• Humidity: 5%–95% RH (non‑condensing)

• Protection: IP20

• Dimensions (H×W×D): ~180 × 120 × 40 mm

Core Functions

• On/Off Control: Drives external loads (valves, relays, motors) via relay contacts.

• Isolation: Electrical isolation between RTU logic and field circuits.

• Status Monitoring: Reports channel state and fault diagnostics to the CPU.

• Hot‑Swap: Can be replaced without shutting down the entire rack.

Application Scenarios

• Power Substations: RTU560 control of breakers, disconnectors, and interlocks.

• Oil & Gas: Pipeline valve and pump control in SCADA systems.

• Water Treatment: On/off control of pumps, valves, and dosing units.

• Factory Automation: Control of motors, contactors, and auxiliary equipment.

Usage & Maintenance

• Install into the designated RTU560 slot and secure backplane connection.

• Configure output logic via supporting software before commissioning.

• Operate within rated voltage/current and temperature limits.

• Inspect connections quarterly; test relays annually.

• Use original replacement modules; power off before removal.