Product Introduction

Model Explanation

• 1KGT006700R0001: Full order part number

• 560RTC01: Product series/model designation

• Series: ABB 560-Series (Real-Time Clock & Synchronization)

• Origin: Sweden

• Weight: ~0.94 kg

Technical Parameters

• Power Supply: 24V DC ±10% (via system backplane)

• Time Synchronization: GPS + internal high-precision RTC

• Time Accuracy:

  • GPS-locked: <1 μs

  • Free-running: <0.1 ppm (~9 ms/day)

• Long-Term Drift: ±2 minutes/year (at 25°C)

• Battery Backup: ≥10-year lifespan (supports off-power timekeeping)

• Interfaces: RS-232, SPB I/O bus

• Pulse Accuracy: 2 μs (first 20 min); 500 ns (after 20 min)

• Operating Temp: -20°C ~ +70°C

• Storage Temp: -40°C ~ +85°C

• Humidity: 5%–95% RH (non-condensing)

• Certifications: CE, UL, RoHS

Core Functions

• High-Precision Timekeeping: Maintains accurate system time with ultra-low drift.

• Event Timestamping: Tags process events with microsecond-level precision for audit and diagnostics.

• System Synchronization: Aligns clocks across RTUs, PLCs, and I/O modules via SPB bus.

• GPS Time Reference: Synchronizes to UTC via satellite for network-wide time consistency.

• Redundant Time Source: Combines GPS and internal RTC for fail-safe operation.

• Time Data Distribution: Broadcasts synchronized time to connected devices.

Application Scenarios

• Power Utilities: Substation RTU560/510 synchronization, fault sequence recording, and grid event correlation.

• Oil & Gas: Pipeline SCADA, compressor station sequencing, and wellhead data time alignment.

• Water Treatment: Plant-wide process synchronization and event logging for compliance.

• Smart Grids: Distributed energy management, meter data synchronization, and load balancing.

• Industrial Automation: AC 500 PLC networks, distributed I/O, and multi-module coordination.

Usage & Maintenance

1. Installation: Mount in RTU560/510 rack; connect backplane power and SPB bus.

2. Configuration: Set GPS parameters, time zone, and synchronization priorities via ABB configuration software.

3. Operation: Monitor GPS lock status and RTC health via front-panel LEDs.

4. Maintenance:

   • Quarterly: Verify time accuracy and GPS signal strength.

   • Annual: Check battery health and backup timekeeping function.

   • Replacement: Use identical part number; re-sync system clock after replacement.