DC162/IP20/53151/03_Ningde Androld Automation Equipment Co.,Ltd.

May 20, 2026

DC162/IP20/53151/03

Part Number: DC162/IP20/53151/03 Brand: KEBA Product Type: Industrial digital & analog mixed I/O module Protection Level: IP20 Application: Injection molding machine, industrial automation equipment, servo motion control system Matching System: Compatible with KEBA CU series CPU main control modules

Description

1. General Information

Part Number: DC162/IP20/53151/03

Brand: KEBA

Product Type: Industrial digital & analog mixed I/O module

Protection Level: IP20

Application: Injection molding machine, industrial automation equipment, servo motion control system

Matching System: Compatible with KEBA CU series CPU main control modules

2. Electrical Parameters

Rated Power Supply: DC 24V ±10%

Working Current: Maximum 1.2A

Power Consumption: About 16W

Built-in Protection: Over voltage, under voltage, over current, short circuit, reverse connection and anti-interference protection

3. I/O Channel Configuration

Digital Input: 16 channels 24VDC universal input

Digital Output: 8 channels transistor type 24VDC output

Analog Input: 4 channels, support 0-10V / 4-20mA signal

Analog Output: 2 channels 0-10V standard analog signal

High-speed Pulse Interface: Support encoder signal collection

4. Communication Mode

Built-in dedicated K-Bus internal bus

Real-time data transmission with host CPU module

Equipped with status indicator lights for power, operation and fault alarm

5. Environmental Conditions

Working Temperature: 0℃ ~ +55℃

Storage Temperature: -40℃ ~ +85℃

Relative Humidity: 5% - 95% RH, non-condensing

Installation Method: Standard cabinet card slot installation

6. Main Functions

Collect on-site switch signals and sensor analog signals
Output control signals to execute actuators and solenoid valves
Realize high-speed position and speed signal feedback
Signal isolation processing to effectively filter industrial site interference
Stable data transmission and synchronous operation with main controller
Support on-site signal expansion and system function expansion

7. Installation Instructions

Cut off the whole system power supply before plugging and unplugging the module
Align the slot and insert it smoothly, and confirm firm contact
Use shielded wires for analog signal wiring to ensure signal stability
Reasonably arrange wiring to avoid strong current cable signal interference
Keep the installation position ventilated and heat-dissipated normally
Regularly check terminal wiring looseness and module running status

8. Safety Notice

This module is professional industrial control accessory, only allowed to be operated and maintained by professional technicians. It is strictly prohibited to disassemble internal components without permission. Please use it within the specified voltage and temperature range to ensure stable service life.

Contact Info